Rock Wool Exterior Insulation

The rock wool exterior insulation is made of natural rocks such as basalt and dolomite as the main raw materials. After being melted at a high temperature of more than 1000 degrees, it is spun into rock wool fibers using a high-speed centrifugal machine. The fibers are slender and flexible.

Common specifications of rock wool exterior insulation boards are as follows:

1.2mx0.6mx140kg/m3x50mm

1.2mx0.6mx150kg/m3x50mm

1.2mx0.6mx160kg/m3x50mm

1.2mx0.6mx170kg/m3x50mm

1.2mx0.6mx180kg/m3x50mm

1.2mx0.6mx190kg/m3x50mm

1.2mx0.6mx200kg/m3x50mm

The inspection contents of rock wool exterior insulation board before leaving the factory include:

1. The surface of rock wool board is flat and the color is balanced

2. Randomly measure the length, width, thickness and weight of rock wool board.

3. The laboratory checks the thermal conductivity, slag ball content test, waterproof test, etc.

4. The outer packaging blister effect is neat.

How to install rock wool exterior insulation board on the exterior wall of a building? 

1. Material preparation: ruler, anchors, rock wool board, screws, impact drill, etc.
2. Base treatment: clean the dust and other impurities on the surface of the building's exterior wall to make the surface flat and dry.
3. Prepare the bonding mortar. After preparing, apply the mortar on the back of the rock wool board and the base respectively.
4. Paste the rock wool board to the building's exterior wall according to the size requirements.
5. Use an impact drill to drill holes and install the exterior wall insulation anchors.
6. Check and accept the quality.
7.